Welcome, Guest. Please login or register.
Did you miss your activation email?

Username: Password:

Author Topic: Flapper on blower not opening  (Read 3365 times)

OHBurning

  • Newbie
  • *
  • Offline Offline
  • Posts: 2
  • OWF Brand: Woodmaster
  • OWF Model: 4400
    • View Profile
Flapper on blower not opening
« on: December 25, 2017, 09:30:05 AM »

Anyone have issues with the flapper not opening when the blower kicks on?  I have caught it a couple times by hearing a buzzing sound when the blower is on.  When I shut the blower off with the switch and turn it back on, the flapper then opens.  Fire went out last night on a cold night because of the flapper not opening. Is there a good way to clean the solenoid or does it need replaced?

Thanks

Logged

mlappin

  • Fabricator Extraordinaire
  • Global Moderator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 4140
  • OWF Brand: homebuilt, now HeatmasterSS
  • OWF Model: Martin Steel Works Gen 1 then, now a G200.
  • North Liberty, Indiana
    • View Profile
    • Altheatsolutions
Re: Flapper on blower not opening
« Reply #1 on: December 25, 2017, 09:57:45 PM »

Next time it does it turn it off, then see if the flapper is stuck from creosote. Could be when you turn it back on the solenoid breaks it lose.
Logged
Stihl 023
Stihl 362
Stihl 460
Sachs Dolmar 112 and 120
Homemade skid steer mounted splitter, 30" throat, 5" cylinder
Wood-Eze model 8100 firewood processor

HeatmasterSS dealer for Northern Indiana

E Yoder

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1296
  • OWF Brand: HeatMaster
  • OWF Model: GS 100
    • View Profile
    • www.heatmasterfurnace.com
Re: Flapper on blower not opening
« Reply #2 on: December 26, 2017, 06:40:46 AM »

I agree, next time it sticks try to lift it by hand before you turn it off and on. See if the resistance is in the solenoid or the flap. Also I think woodmaster uses a rubber hinge of sorts on the flapper, I've seen it get brittle over the years and hang up.
Logged
HeatMaster dealer serving southwest VA.
www.heatmasterfurnace.com

OHBurning

  • Newbie
  • *
  • Offline Offline
  • Posts: 2
  • OWF Brand: Woodmaster
  • OWF Model: 4400
    • View Profile
Re: Flapper on blower not opening
« Reply #3 on: December 26, 2017, 09:55:59 AM »

Yeah, I have seen the posts about the flap sticking, I have inspected the flap and didn't see any creosote.  It has happened a couple times so I don't think it is creosote buildup.  I will try lifting the flap next time it happens.  I actually bought a flap this summer as part of a maintenance kit, but I didn't like it was in bad shape at all.   I manually pushed the solenoid in and it didn't feel like it was sliding freely.

thanks for your help!
Logged