Outdoor Wood Furnace Info

All-Purpose OWF Discussions => General Outdoor Furnace Discussion => Topic started by: R W Ohio on March 14, 2009, 01:58:44 PM

Title: OWB Loading door bolt replacement
Post by: R W Ohio on March 14, 2009, 01:58:44 PM

Because the hinge bolts had egg shaped the holes in the loading door,I drilled out both sides of both hinges and pressed in bronze bushings.I then used shoulder bolts and nylok nuts.Now if the bushings wear all that needs to be done is to push out the worn bushings and press in new ones.

RW

Title: Re: OWB Loading door bolt replacement
Post by: willieG on March 14, 2009, 03:03:23 PM

Nice fix ...good job

Title: Re: OWB Loading door bolt replacement
Post by: jackel440 on March 14, 2009, 08:38:59 PM

That's a nice job!I will make a note to use some sort of bushed door hinge on mine when i start building it.