Outdoor Wood Furnace Info

Outdoor Furnaces - Manufacturers WITH EPA-Certified Models => WoodMaster => Topic started by: MarineRecon on January 01, 2013, 07:49:52 PM

Title: New owner of WoodMaster 4400 with questions
Post by: MarineRecon on January 01, 2013, 07:49:52 PM

We just bought a house with a WoodMaster 4400 installed in an outdoor shed with lots of room for wood. Looks like a great installation. Unit was installed new in January 2011.

Unit was working great until today. Fan flap opens but fan does not turn on. Humms only.

I reset unit as per instructions but still no go...

Ideas and suggestions welcomed

Thanks,
Nick

Title: Re: New owner of WoodMaster 4400 with questions
Post by: Scott7m on January 01, 2013, 08:48:30 PM

If the flap opens and fan don't come in and you can hear it humming the fan is likely bad,  check for loose wires too

Title: Re: New owner of WoodMaster 4400 with questions
Post by: victor6deep on January 02, 2013, 09:46:47 PM

Light tap the motor and drip some gear lube in the 2 small wick holes on the housing.