Outdoor Wood Furnace Info

Outdoor Furnaces - Manufacturers WITH EPA-Certified Models => Central Boiler => Topic started by: drpinard on October 05, 2013, 05:48:29 PM

Title: Rinnai
Post by: drpinard on October 05, 2013, 05:48:29 PM

Just bought a Central Boiler E2400. What is the best way to use hotwater with my Rinnai? Do I allow hot water to go through with a plate exchanger and hope it doesnt fire because of temperature going in? Any thoughts

Title: Re: Rinnai
Post by: RSI on October 05, 2013, 06:12:41 PM

You will probably need to use a strap on aquastat to disable it when there it hot boiler water.

Title: Re: Rinnai
Post by: johnybcold on October 06, 2013, 12:54:03 PM

My unit is piped directly to the boiler, no plate exchanger I set the boiler to the lowest temp it has 140 it never goes on because the CB keeps it hotter then that, my first year I turned the inside boiler off

Title: Re: Rinnai
Post by: slimjim on October 07, 2013, 12:20:02 PM

Is your gas boiler plumbed primary secondary piping or are you trying to force 1 inch of water through a 1/2 inch port on your gas boiler, that normally does not work out well, is it a modulating boiler or does it run wide open on a call for heat, you should know this before you plumb it or you will soon need a service guy to come out and fix your mistakes, it may get expensive.