Outdoor Wood Furnace Info
Outdoor Furnaces - Manufacturers WITH EPA-Certified Models => Central Boiler => Topic started by: Roger2561 on November 18, 2013, 02:13:34 PM
-
Hi all - I'm looking for a replacement blower motor for my Central Boiler E-Classic 1400. Essentially, I want it to have the shelf in case the one the 1400 decides to fail. I don't want to be caught with my pants down, so to speak if it fails when the temps are cold. Central sells there's for $230.00. I think that's excessive and someone must have an after market motor that does the samething. The one that's on the 1400 is a FASCO, 2071-10411 written on it. I cannot find a replacement no matter where I look. Anyone have any ideas or URL link they are willing to share with me? I also want to have on hand replacement solenoids for the "just in case" scenario. Perhaps someone knows where i can find replacements for those too? Thanks, Roger
-
Hey Roger,
I just bought one from my installer. Think I payed around 100.00 give or take.
-
Hi all - I'm looking for a replacement blower motor for my Central Boiler E-Classic 1400. Essentially, I want it to have the shelf in case the one the 1400 decides to fail. I don't want to be caught with my pants down, so to speak if it fails when the temps are cold. Central sells there's for $230.00. I think that's excessive and someone must have an after market motor that does the samething. The one that's on the 1400 is a FASCO, 2071-10411 written on it. I cannot find a replacement no matter where I look. Anyone have any ideas or URL link they are willing to share with me? I also want to have on hand replacement solenoids for the "just in case" scenario. Perhaps someone knows where i can find replacements for those too? Thanks, Roger
Roger if you write down the info on it you can get at a Grainger if you have one by you
-
Well I found what your looking for..The model number fan on your boiler has been replace with the a new model number A166..You can buy it at www.altheatsupply.com (http://www.altheatsupply.com) for $87.40.. Ive bought from them a few times..My boiler also uses fasco fans. Hope this help you out! Im sure you can buy all of the solenoids from them too
-
Well I found what your looking for..The model number fan on your boiler has been replace with the a new model number A166..You can buy it at www.altheatsupply.com (http://www.altheatsupply.com) for $87.40.. Ive bought from them a few times..My boiler also uses fasco fans. Hope this help you out! Im sure you can buy all of the solenoids from them too
MattyNH - Thanks for the link and info. I have to admit, I'm quite ignorant when it comes to knowing anything about electric motors. Thanks again. Roger
-
Roger,
Grainger has the Dayton model of the fan, 1TDP7. Don't know if you go towards Manchester that much but they do have it in stock down there. Same price as altheating and it will be to you next day since it is so close. Another option if you are looking is at http://www.electricmotorwarehouse.com/fasco/fasco_blower.htm (http://www.electricmotorwarehouse.com/fasco/fasco_blower.htm) You have to scroll down but you will see motor A166. It is 66.98 plus $19 shipping. Altheating is $86 plus $13 shipping.
-
Roger,
Grainger has the Dayton model of the fan, 1TDP7. Don't know if you go towards Manchester that much but they do have it in stock down there. Same price as altheating and it will be to you next day since it is so close. Another option if you are looking is at http://www.electricmotorwarehouse.com/fasco/fasco_blower.htm (http://www.electricmotorwarehouse.com/fasco/fasco_blower.htm) You have to scroll down but you will see motor A166. It is 66.98 plus $19 shipping. Altheating is $86 plus $13 shipping.
Unfortunately, I will not be anywhere near Manchester anytime soon. I think I'll look at online sites and see who has them the cheapest and go from there.
Thanks for your guys. I appreciate it. Roger