Outdoor Wood Furnace Info

Outdoor Furnaces - Manufacturers WITH EPA-Certified Models => HeatMaster => Topic started by: TM88 on February 14, 2014, 08:50:11 AM

Title: Door Gasket
Post by: TM88 on February 14, 2014, 08:50:11 AM

Looking to replace my door gaskets in the spring on my stove just wanting to make sure I am right and that they are 1" rope??

Title: Re: Door Gasket
Post by: ITO on February 14, 2014, 01:01:31 PM

They're not all the same across the board for every brand but 1" is common. There are many folks who like the siliconized version, I've always used the regular rope ones, some style stoves use a flat gasket, you can look at this one and see if it is like the one you have now: http://www.altheatsupply.com/fire-rope.html (http://www.altheatsupply.com/fire-rope.html)
 slimjim is going to post and try to sell you one of his, he's driving a Cadillac off all the others he has sold here! LOL, Sorry Slim somebody had to say it!

Title: Re: Door Gasket
Post by: slimjim on February 14, 2014, 03:04:42 PM

Thats really nice Thank you I got a good chuckle on that one, almost swallowed my cigar!

Title: Re: Door Gasket
Post by: yoderheating on February 15, 2014, 06:24:41 AM

 Heat Master uses a standard 1 inch fire rope. Pull the old one out, clean up behind it a bit, put a bead of high temp silicone in and then the rope. Do not stretch the rope at all when putting it in. Let the door stand open long enough for the silicone to harden.

Title: Re: Door Gasket
Post by: TM88 on February 15, 2014, 08:11:57 AM

Thank You all for the info