Outdoor Wood Furnace Info
Outdoor Furnaces - Manufacturers WITH EPA-Certified Models => Portage & Main => Topic started by: racnruss on June 01, 2014, 06:59:55 PM
-
A question for those in the know: on this particular stove, which pipes on the back are supply and which are return? It doesn't say in the owner's manual.
thanks, Russ.
-
I normally pull from the top of the 250
-
RUNNNNNN it hard it loves it.
-
thanks guys.
I plumbed the back today and am pulling from the top. I even plumbed it so I was pulling from both top bungs and returning to both bottom bungs even though I am only running one pump. Figured that would give most complete circulation within stove.
Funny, I thought it would be bigger. Just overall size is smaller than I'd imagined. I'd seen videos and stuff but never in person. Kind of like that rock star that looks so big on stage but is really small in person.
Its actually shorter front to back than the 220 was, and lighter, the skid loader had more trouble with the gt-220.
After last winter I'd be OK with skipping one but I'm going to be ready come October.
-
Racnruss, Thank you for your purchase, if you are interested here is a simple drawing of the way I like to add a second aqua stat to the supply to shut off the blower when you run out of wood in the firebox, it is actually for the 250 but simply delete the actuator for those who do not have it on their other units, this helps to keep the heat in the boiler. Start by finding the power wire coming from the existing Aqua Stat and taking off the wire nut, the power wire then goes up to terminal R on the Honeywell strap on and then comes off the W terminal back to the blower and actuator power wires, this is set to about 160 degrees F, it will break connection shutting off the blower below 160 degrees F, A simple 60 minute timer can be wired in parallel to bypass the strap on Aqua Stat for firing up the unit