Outdoor Wood Furnace Info

All-Purpose OWF Discussions => Plumbing => Topic started by: atvalaska on July 17, 2014, 03:06:47 PM

Title: fittings for my 1 1/4 thermo pex /to manifold hook up
Post by: atvalaska on July 17, 2014, 03:06:47 PM

will I got the piping into the building ,now I need to mount it to some uni-a-strut ... ...now here's my ? ......  I need a fitting on my 1 1/4 pipe   r&s lines to hook into a EPM from upnor    looks like i'll have to neck it down to 1" to hook it to the manifold...I've been using " pex supply" ....any ideas? 

Title: Re: fittings for my 1 1/4 thermo pex /to manifold hook up
Post by: LittleJohn on July 18, 2014, 06:25:56 AM

Try this: http://www.supplyhouse.com/Uponor-Wirsbo-Q4143213-R32-x-1-1-4-ProPEX-Adapter-Straight
 (http://www.supplyhouse.com/Uponor-Wirsbo-Q4143213-R32-x-1-1-4-ProPEX-Adapter-Straight)

I know that they also make the same fitting with an elbow configuration; seen it in the Uponor catalog, just not on PexSupply

Title: Re: fittings for my 1 1/4 thermo pex /to manifold hook up
Post by: atvalaska on July 18, 2014, 11:40:15 AM

thanks seen that ....will hunt up a 90deg