Outdoor Wood Furnace Info
All-Purpose OWF Discussions => Electronics => Topic started by: wardog on August 16, 2014, 11:25:01 AM
-
I read and printed off a thread on this going back to January 2013 in which Scott7m replied to this very type situation. What I have is a York heat pump with electric coil back up and air running with a White Rodgers 1F89-11 thermostat. I read with interest the reply of merely adding a second thermostat along side of this one and came across a Honeywell TH3210D1004 which is a two heat, one cool thermostat in lieu of the one recommended 1 heat/1 cool. I also saw this addressed in the thread BUT the th3210d1004 has NO "W" terminal. It has an "R" terminal for power and a "G" terminal for the fan relay. I am assuming that I can merely jumper the "R" from the old to the "R" on the new and the "G" from the old to the "G" on my new th3210d1004 thermostat?
-
Send a private message to RSI. He is excellent at these types of questions. But, he hasn't been on in a while. He'll get you fixed up!