Outdoor Wood Furnace Info

All-Purpose OWF Discussions => General Outdoor Furnace Discussion => Topic started by: jerkash on November 19, 2014, 11:18:36 AM

Title: Wood Splitter
Post by: jerkash on November 19, 2014, 11:18:36 AM
https://www.facebook.com/video.php?v=798488583551954 (https://www.facebook.com/video.php?v=798488583551954)
Title: Re: Wood Splitter
Post by: smitty33 on November 19, 2014, 03:18:43 PM
Sweet. Hate to see the cost of that!
Title: Re: Wood Splitter
Post by: Pinehouse4 on November 19, 2014, 06:25:41 PM
Oh baby, and I thought my 4 was was great. It's just cutting those blocks that would be harder to do.

Bob
Title: Re: Wood Splitter
Post by: DaveWertz on November 19, 2014, 09:07:44 PM
That looks like way to much fun!
Title: Re: Wood Splitter
Post by: farmboythegreat on November 21, 2014, 11:21:12 AM
a machine that size should  have saw  :bash: :bash:
Title: Re: Wood Splitter
Post by: dwneast77 on November 21, 2014, 03:01:48 PM
Kind of like this one?  http://www.hud-son.com/products/product-detail/badger (http://www.hud-son.com/products/product-detail/badger)    I see they have the Wolverine model too which is a little smaller unit and less money.  But in the long run I'd really like to move over to the P&M chip burner. 
Title: Re: Wood Splitter
Post by: slimjim on November 22, 2014, 04:36:46 AM
For about the same money as a processor, I think you could buy a chip burner, I certainly like mine, besides chips in bulk are cheaper than tree length firewood.
Title: Re: Wood Splitter
Post by: mlappin on November 22, 2014, 06:51:48 AM
a machine that size should  have saw  :bash: :bash:

 :post:

I still kick myself for letting my uncle buy the Woodeze processor back I had.
Title: Re: Wood Splitter
Post by: dwneast77 on November 22, 2014, 06:38:08 PM
Trust me Slim,  I'd really enjoy the ease of the chip burner.  Just still not sure about the chip storage.  $30k or so for the burner and could easily spend another $10k on storage.  Used trailers is probably the most reasonable way to do it since I'm not sure if anyone around here has a live bottom trailer.  How are you handling the storage part with your chip burner??  The biggest problem I face is that I still haven't found the tree that the money is growing on and I don't have a cubic dollar.  So for now I make due with what I have.  I keep watching, reading and learning all I can in the meantime.

Jeff
Title: Re: Wood Splitter
Post by: mlappin on November 22, 2014, 07:06:10 PM
Unless your chipping dry trees won't the chips eventually try to rot?

I agree the ideal of burning chips is very attractive, however around here the only people who chip are tree trimmers and they don't work a lot in the winter.
Title: Re: Wood Splitter
Post by: dwneast77 on November 22, 2014, 07:47:07 PM
I think the trick is keeping them dry in a place with good ventilation.  I've also heard to turn them over occasionally.
Title: Re: Wood Splitter
Post by: slimjim on November 23, 2014, 04:43:10 AM
They don't decay after they are frozen and as long as they have not been rained on they are easier to feed than unfrozen chips, look at them like 2 sponges, 2 wet sponges will not slide over one another very easily but if they freeze then they are like rubbing 2 ice cubes against one another, warm air is then introduced just before the burn head to thaw the chips and take off the surface moisture. I burned fresh green chips all last winter and had zero issues with frozen chips, summertime use is about 2 months of storage before decay really gets started.  I use a 20 foot car hauler trailer with 8 foot sides and front, canvas top for easy top loading and normally have the loggers blow them into the back of the trailer right in the woods, 1 load normally gets me about 1 month of heat for about $100-$150 compare that to about a cord of wood per week in tree length and you have a huge savings not only in $'s but also labor.