Outdoor Wood Furnace Info
All-Purpose OWF Discussions => Electronics => Topic started by: teburman on December 18, 2010, 09:36:26 PM
-
I read in one of these threads where a member had an Aspen 175 that was wired such the heating system would failover to the oil fired heater when the Aspen would go “cold”. They also had controls that prevented the Aspen from freezing by using heat from the oil fired heater. I am interested in doing the same with my Aspen.
Unfortunately I did not bookmark the thread or write the user’s name down to contact them. If any of you have your unit set up like this and is willing to share the setup information – wiring diagrams, parts list etc. I would appreciate it.
This is the biggest short coming on this unit – it doesn’t have a low temperature shutdown – so the blower motor runs for naught when the fuel supply is consumed. I have ruined three blower motors so far this year – over heated and then contaminated with creosote.
-
I have a setup like that with my aspen, I have talked about it.
-
Thanks for responding.
This is my third year with my Aspen - I did a self install and I am not satisfied with the way things are working I was hopping to find some one that would help me improve the controls. I like your setup and hope you would help me with mine – I am willing to compensate for your service.
I would have responded earlier but I’ve had several more pressing issues to deal with – I hope to have my heater retrofitted with the proper controls and operating similar to yours in time for the next heating season.
If you are interested please let me know.