Outdoor Wood Furnace Info

Outdoor Furnaces - Manufacturers WITH EPA-Certified Models => Heatmor => Topic started by: heat550 on October 05, 2015, 06:57:36 PM

Title: inhibitors 20 years
Post by: heat550 on October 05, 2015, 06:57:36 PM

I'm installing new 400 css I was thinking in 20 years how many gallons of inhibitor would I buy. Or maybe I should ask 1 gallon a year ?  This is if tested every year.  Just wondering how other do it .

Heat550

Title: Re: inhibitors 20 years
Post by: tinfoilhat2020 on October 06, 2015, 10:37:57 AM

heat,

I added the one gallon that came with the stove....i let the chemical circulate for 24yrs, then collected sample and sent into HEatmor. My results were perfect....so i would assume you would need at most 1 gallon per year.

Title: Re: inhibitors 20 years
Post by: heat550 on October 06, 2015, 09:48:35 PM

Quote from: d5knapp on October 06, 2015, 10:37:57 AM

heat,

I added the one gallon that came with the stove....i let the chemical circulate for 24yrs, then collected sample and sent into HEatmor. My results were perfect....so i would assume you would need at most 1 gallon per year.

lol at 24 years.  A guy needs to make sure its mixed enough.  Before sending sample . :thumbup:  :post:

Heat550

Title: Re: inhibitors 20 years
Post by: tinfoilhat2020 on October 07, 2015, 07:58:45 AM

hahah 24hrs

Title: Re: inhibitors 20 years
Post by: heat550 on October 07, 2015, 10:47:46 AM

Quote from: d5knapp on October 07, 2015, 07:58:45 AM

hahah 24hrs
[/quote

Will let you know my 200css its been 19 years 😀 only put inhibitor in once my dad took care of it after that I don't know what he did. Will send you a picture . I figure 24 hours 😀 I tested my ph and it was between 8.5 and 9.5 . I got super lucky as wasOblivious to what was going on. going try and have my act together on new stove.  :thumbup:

Heat550