Outdoor Wood Furnace Info

All-Purpose OWF Discussions => General Outdoor Furnace Discussion => Topic started by: atvalaska on January 13, 2016, 07:01:26 PM

Title: trying something new!
Post by: atvalaska on January 13, 2016, 07:01:26 PM

I have posted what I have did in the pass but this time I'm going all out  u see the boiler I have ...it has a fan in the back the blows up under the the grate ...and a fan in the door….that adds some air to the burn .....to thin it out /keep it cleaner burning.. I pulled that off an put a plate in there....now I'm working on the ash door below the main door....opposite the fan in the rear ..I'm going to remove the door and replace it with a flat plate and add another/I mean move fan that was on the door to the new ash door..…..! Think forge !...more to come ...think with me well ya !

Title: Re: trying something new!
Post by: atvalaska on January 14, 2016, 01:48:28 PM

Got the fan tube and bracket coming ,now to get some plate steel to weld it to ...

Title: Re: trying something new!
Post by: agriffinjd on January 14, 2016, 04:40:17 PM

You're doing all this while the stove is working?

Why are you doing this?  Is it that lonely out in the Alaskan bush???  :-)

Title: Re: trying something new!
Post by: atvalaska on January 14, 2016, 04:43:29 PM

I'm making it better !

Title: Re: trying something new!
Post by: Sloppy_Snood on January 14, 2016, 05:06:27 PM

He's a "modder."  8) :thumbup:

Title: Re: trying something new!
Post by: Sloppy_Snood on January 16, 2016, 03:33:20 PM

Any update on this atvalaska?  ???

Title: Re: trying something new!
Post by: atvalaska on January 16, 2016, 08:36:37 PM

Still waiting on the part .…..I think I found the holy ..chit of wood buring ! Lol