Outdoor Wood Furnace Info

All-Purpose OWF Discussions => General Outdoor Furnace Discussion => Topic started by: ijon on June 15, 2016, 02:47:03 AM

Title: bl 2840 pump
Post by: ijon on June 15, 2016, 02:47:03 AM

Does anyone have a picture of their bl 2840 pump installation in the boiler?

Title: Re: bl 2840 pump
Post by: Crow on June 15, 2016, 10:53:14 AM

I have a couple ijon, I can try to post them on here later this evening. Is there a something specific or a general pic of the pump area?

Title: Re: bl 2840 pump
Post by: Crow on June 15, 2016, 11:05:09 AM

I don't have much luck posting pics. See if this works?
Someday I will move the pump or return line to the same sides but it was easier at the time to hook it up the way I did.
Yes I am pulling from the top and returning to the bottom as per the original manual.

Title: Re: bl 2840 pump
Post by: willieG on June 15, 2016, 06:41:19 PM

my pump is in the basement, pulling from the top of the OWB and returning to the bottom, taco 0011, same pump since 2001

Title: Re: bl 2840 pump
Post by: mlappin on June 15, 2016, 08:29:21 PM

Quote from: willieG on June 15, 2016, 06:41:19 PM

my pump is in the basement, pulling from the top of the OWB and returning to the bottom, taco 0011, same pump since 2001

Thats about how long I used my Grundfos for in the basement, new stove had the new pumps placed at the rear. Unless Grundfos drastically cheapened things up I don’t expect to have to change one for a long time. Original pump is still in use, just on snow melt duty now.

Title: Re: bl 2840 pump
Post by: ijon on June 16, 2016, 02:42:34 AM

Thank you all. I am hooking up the pump for a friend of mine. Mine is in the basement.