Outdoor Wood Furnace Info

Outdoor Furnaces - Manufacturers WITH EPA-Certified Models => Portage & Main => Topic started by: randy_1 on August 29, 2016, 07:14:09 PM

Title: Replacing nossel
Post by: randy_1 on August 29, 2016, 07:14:09 PM

Any one had a hard time getting the old nossel out of the 250,? I've tried a small automotive screw jack but it seems to be taking a lot more pressure than I am comfortable with. I don't want to ruin the base it sits in. Any thoughts?

Title: Re: Replacing nossel
Post by: coolidge on August 30, 2016, 03:46:38 AM

You may have too persuade it a little, might even come out in pieces.

Title: Re: Replacing nossel
Post by: Cabo on August 30, 2016, 02:40:47 PM

I used an air chisel.  It took about 10 minutes to get it out, clean up and drop the new one in.

Title: Re: Replacing nossel
Post by: randy_1 on October 23, 2016, 05:42:35 PM

Yup ,,,hammer and a chisel and it was done in a short time  >:D