Outdoor Wood Furnace Info
Outdoor Furnaces - Manufacturers WITH EPA-Certified Models => Central Boiler => Topic started by: bjp on November 11, 2019, 08:23:15 AM
-
Just wanted to check in with others to see if this is something you have noticed too or not. On my CB Classic Edge 750 HD, I've noticed that when I use the scraper tool on the interior of the door and the frame that the door sets into, some of the flat black paint has been peeling/scraping off along with burn residue. Is this something I should be worried about? I figure come summer I'll re-paint it with some high-temperature flat black to avoid corrosion, but since it started happening the first time I scraped the door I figure I should check in. Is this what the rest of you have typically seen?
Thanks!
-
Just wanted to check in with others to see if this is something you have noticed too or not. On my CB Classic Edge 750 HD, I've noticed that when I use the scraper tool on the interior of the door and the frame that the door sets into, some of the flat black paint has been peeling/scraping off along with burn residue. Is this something I should be worried about? I figure come summer I'll re-paint it with some high-temperature flat black to avoid corrosion, but since it started happening the first time I scraped the door I figure I should check in. Is this what the rest of you have typically seen?
Thanks!
That's nothing to worry about. In the spring I simply coat it with a heavy coat of NEW motor oil as I do with the firebox. I've never painted mine, but if that's what you want to do, go for it. Roger
-
Thanks Roger! That's about what I had hoped to hear back. I'll probably just give it the oil treatment after the season ends.