Welcome, Guest. Please login or register.
Did you miss your activation email?
Show Posts
This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.
Pages: [1] 2
1
HeatMaster / Re: Heatmaster MF 10000e tank burned out after 2 years of use
« on: June 29, 2014, 08:01:55 PM »
I would like to update the status on this,heatmaster and my dealer fully took care of everything ,fixed my stove got it up going great at no cost to us,I would like to extend my appreciation to my dealer David Yoder and also heatmaster for standing behind there warranty both are very reputable company's and also to the guys on the forum for putting there input in.
Highly recommend heatmaster stoves there's somebody on the other end of the deal looking out for u!!
Tony Atwell
Tg sales
Highly recommend heatmaster stoves there's somebody on the other end of the deal looking out for u!!
Tony Atwell
Tg sales
2
HeatMaster / Re: Heatmaster MF 10000e tank burned out after 2 years of use
« on: January 31, 2014, 07:28:14 PM »
We haven't been able to put a finger on what has caused this all of our water tests have come back good and the independent lab we hired could not find anything corrosive in the water or with a metal sample
They said it just seemed to rust thru
But we are still investigating if we come up with anything we will post it
They said it just seemed to rust thru
But we are still investigating if we come up with anything we will post it
3
HeatMaster / Re: Heatmaster MF 10000e tank burned out after 2 years of use
« on: December 28, 2013, 12:49:49 PM »
That is good advise we actually did a test this past month to make sure no pool water was getting into the stove we had a plumber who was installing a sterling water softener system for us unhook the lines at the pool loop and he ran a vacuum and pressure test ,,,, everything was good
We did have another lab run some tests for us that could check for chlorine and they said there was no trace of it or salt so we are still investigating
Very glad to hear you haven't had any issues with your unit I'm hoping we got a lemon and the next one will be trouble free
We did have another lab run some tests for us that could check for chlorine and they said there was no trace of it or salt so we are still investigating
Very glad to hear you haven't had any issues with your unit I'm hoping we got a lemon and the next one will be trouble free
4
HeatMaster / Re: Heatmaster MF 10000e tank burned out after 2 years of use
« on: December 14, 2013, 01:12:51 PM »
That def would be a possibility
I'm going to try and get some more water tests from a advanced lab out west I think they can shed some light on things
Thanks for all the replys and input on this subject and I would also like to note that heatmaster has stood behind this 100% they have sent us a new tank and our dealer is waiting for warm weather to change it out so regardless what the problem we are a totale satisfied heatmaster customer and we highly recommend there products and service
Tony Atwell
Tg manf.and sales
Www.tgsales.com
I'm going to try and get some more water tests from a advanced lab out west I think they can shed some light on things
Thanks for all the replys and input on this subject and I would also like to note that heatmaster has stood behind this 100% they have sent us a new tank and our dealer is waiting for warm weather to change it out so regardless what the problem we are a totale satisfied heatmaster customer and we highly recommend there products and service
Tony Atwell
Tg manf.and sales
Www.tgsales.com
5
HeatMaster / Re: Heatmaster MF 10000e tank burned out after 2 years of use
« on: December 14, 2013, 12:05:03 PM »
So what are u thinking could be the cause?
6
HeatMaster / Re: Heatmaster MF 10000e tank burned out after 2 years of use
« on: December 13, 2013, 05:26:55 PM »
Note on pool heat exchangers from what I've been told u need a titanium with salt water pools and not the stainless we have had issues with the stainless heat exchangers leaking around where the fitting flanges are welded to the exchanger , we would get a pin hole
7
HeatMaster / Re: Heatmaster MF 10000e tank burned out after 2 years of use
« on: December 13, 2013, 05:13:26 PM »
No trouble with pool
8
HeatMaster / Re: Heatmaster MF 10000e tank burned out after 2 years of use
« on: December 13, 2013, 05:10:59 PM »
The pool heat exchanger looks good no issues with the titanium
9
HeatMaster / Re: Heatmaster MF 10000e tank burned out after 2 years of use
« on: December 13, 2013, 05:08:40 PM »
It's a titanium heat exchanger for my pool
It's a salt water pool
It's a salt water pool
10
HeatMaster / Re: Heatmaster MF 10000e tank burned out after 2 years of use
« on: December 12, 2013, 08:43:16 PM »
The best we can tell we have went thru 5 pumps, a relay, and a couple of valves that are mounted in the plumbing from the stove to my house one thing we have noticed the second pump on the stove is a shorter run and we haven't had to change that pump it's only been the pumps on the house side that has went out over and over since they are pumping the same water would that lessen the possibility of something corrosive? So to narrow it down the pump that runs our shop heaters so far has had no trouble, the circuit that goes to my house and pool have 2 pumps stacked one on top of the other and they are wired to never shut off they keep the water circulating , these are the pumps I've had to change my dealer came last week and changed them again
Any ideals
Any ideals
11
HeatMaster / Re: Heatmaster MF 10000e tank burned out after 2 years of use
« on: December 07, 2013, 01:20:30 PM »
We have went thru several pumps and valves since we have had it I'm the owner of tg sales and I have a guy that maintains the stove so I'm not for sure of the exact# but my guy has kept a detail list of issues and parts we have had to replace I will get it from him next week and post what we have changed and how often maybe that will tell u something also thanks for the reply on u have customers using it year round I'm glad to hear that
Thanks again for any help
Thanks again for any help
12
HeatMaster / Re: Heatmaster MF 10000e tank burned out after 2 years of use
« on: December 06, 2013, 02:34:05 PM »
I would be curious to talk to someone who uses a heat master stove year round with a hard load daily I've spoken to several guys that use them but haven't found any one that uses as much as we do
13
HeatMaster / Re: Heatmaster MF 10000e tank burned out after 2 years of use
« on: December 05, 2013, 06:26:47 PM »
After the stove got the holes in it heat master wanted another water sample , I just got the results back today from them , they said all was fine so we still have no clue what could have done this we also noticed that our float is in bad shape the ball that is on the end of has seemed to rust off and the float tube is in bad shape also,,,,,,,
14
HeatMaster / Re: Heatmaster MF 10000e tank burned out after 2 years of use
« on: December 03, 2013, 03:26:38 PM »
The corrosion Def came from the inside nothing dripped on tank it's hard to see it but u can see the metal actually gone more on the inside than on outside my dealer said it Def came from inside to out I'm hoping heat master can she'd some light for us we have alot of curious people up this way also
15
HeatMaster / Re: Heatmaster MF 10000e tank burned out after 2 years of use
« on: December 03, 2013, 03:21:09 PM »
We burn mostly coal this is at a commercial location we use it to heat a manufacturing facility puts out great heat
Pages: [1] 2