Welcome, Guest. Please login or register.
Did you miss your activation email?

Username: Password:

Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.

Messages - Scott7m

Pages: [1] 2 3 ... 250
HeatMaster / Re: heatmaster c series
« on: February 02, 2015, 08:35:52 AM »
If it worked any better rancruss it wouldn't even work at all.

That's why you can't add any stack to the c series from what I've seen, if you add any stack your exhaust Temps are to low and it will condense in n the pipe and drip junk back into your stove.  So if we made this furnace even more efficient there wouldn't be a way to make it vent properly

Country boy, I've got 2300 Sq ft, one of my customers has it on about 10k, not here at my place tho

HeatMaster / Re: heatmaster c series
« on: February 01, 2015, 12:54:46 PM »
That's not the heat master home page but rather a distributor

I've got 375c heating near 10k Sq ft

I think they are similar in output to the 10E in reality

The firebox is huge

For Sale / Re: Empyre XT100 For Sale Demo Model
« on: February 01, 2015, 12:52:20 PM »
Hey, thanks for the conversation
I think it's just a bit to small for your situation and climate

General Outdoor Furnace Discussion / Re: 5 wrap pex melting snow
« on: January 29, 2015, 09:00:21 AM »
That could be true but I was thinking in his location the water table is usually fairly deep, but it could be

General Outdoor Furnace Discussion / Re: 5 wrap pex melting snow
« on: January 29, 2015, 08:27:14 AM »
I do remember someone getting badgers splice repair stuff but I didn't remember it being you.  Have you noticed a big increase in wood use.

HeatMaster / Re: Looking for Ideas
« on: January 28, 2015, 09:37:33 PM »
I'm thrilled richard has joined the heat master team!  Excited about what he can bring to the table

General Outdoor Furnace Discussion / Re: 5 wrap pex melting snow
« on: January 28, 2015, 09:35:44 PM »
   Don't run him off for having a bad day. It happens. This thread will be a good learning tool for everyone by the time the story is over.
   If your losing a gallon or 2 per month, it could be leaking from the clamps. Only 1 way to find out.

I just think it's ground water infiltrating his pipe

A gallon a month on that stove is normal

General Outdoor Furnace Discussion / Re: 5 wrap pex melting snow
« on: January 28, 2015, 08:27:21 PM »
Let's not get carried away to far here..  first of all apology accepted

Now let's try to fix this

If the splice is the source of the leak only dig there to see if it's there...  if it is leaking there let's see what can he done.  I would see if the pipe is filled with water to the point it could be siphoned out, if it has then get as much out as possible. 
Where it's spliced I would try to make a dry zone around the joint, I would dig under it and fill with stone and fill with stone in a circle around and over the joint as then no water could stand around the joint and weasel in.  If you see where it's leaking, pm here and I'll send you out a seal I've recently acquired for such issues,it's a rubberized shrink wrap seal that you can put on with a heat gun.  Be very very careful tho, the melting point of the shrink wrap is not a lot cooler than that of the black tile but it can be done

General Outdoor Furnace Discussion / Re: 5 wrap pex melting snow
« on: January 28, 2015, 05:33:16 PM »
I sold it to you and never once told you it was logstor, you initially ordered around 100 ft of badger 5 wrap and then ordered another 100 feet, I didn't realize you were splicing it and around 8 bucks a foot is average pricing at the time for 5 wrap.  If you'd ordered logstor at that time it would have been 12.90/ft plus shipping

Logstor doesn't even make wrapped products, they only sell foam filled pipe

I'm not sure why you thought you were getting logstor but think you'd known the difference when you buried it??????? 

Evidently where you spliced it tho is leaking and allowing water into the pipe, where ever the splice is dig it up and see if u can address it or perhaps dig a hole under the splice and back fill with gravel so water doesn't Lay around the pipe and sinks on down

Sorry if I came of blunt but I've never sold a product as logstor that wasnt, I don't even see how the 2 could be confused

It could be a leak

Keep us posted

If however you fill the stove at max temp  and check water level at a lower temp it can move a good 2-3 inches on the float. 

Def keep us posted

General Outdoor Furnace Discussion / Re: What happened to Scott7m?
« on: January 28, 2015, 08:28:12 AM »
Hey Scott,

If you ever have a potential customer that wants to look at a Ridgewood in southern Indiana, I would be happy to help you out by showing ours.  We love it!!!

Thanks, I appreciate it

General Outdoor Furnace Discussion / Re: What happened to Scott7m?
« on: January 28, 2015, 08:27:27 AM »

I don't know you ... But welcome back!.. Lets get this forum rocking and spread the word.  I see no advertisements so the owner is paying out of pocket mostly.  I hope in the future the owner of the site can get enough traffic to allow advertisements of boilers, to help support such a great forum.  Would it be out of hand to accept donations?  I'm all for a donation link to help keep this forum growing.

The reason this forum is what it is today is because of lack of advertisements.  People can come here and openly discuss all brands and models and even dealers like me and slim help those no matter the brand.  When advertising dollars start coming in it will go down the tubes in a hurry.

I have spoke with the site owner and don't think he's concerned with the cost or running the site. 

But one thing all of us from back in the beginning has been addimant about is keep the banners off of here and let it be purely about getting people to burn wood and helping others

General Outdoor Furnace Discussion / Re: What happened to Scott7m?
« on: January 27, 2015, 07:10:42 PM »
Thanks again

Glad to see some familiar faces

For Sale / Empyre XT100 For Sale Demo Model
« on: January 27, 2015, 04:36:05 PM »
I have yet another Empyre XT100 gasser for sale, this one was used as a demo for roughly 2 months.  It has been sent back to Empyre for all updates and does have the 304 stainless firebox and factory warranty remaining.

It's for homes under 2500 square feet and is EPA phase 2 certified.

The best part is the price!  $4995.00  -  over $3000 off retail

We can ship anywhere in the country! 

HeatMaster / Re: heatmaster c series
« on: January 27, 2015, 03:13:22 PM »
Yup they are similar construction wise to the end series but many things I do like  better.  Taller firebox, easier to load, higher door position, extra pass in the top, the divider in the top is removable and makes cleaning easier too.  I really like them and I'm getting ready to order a load of them.

Pages: [1] 2 3 ... 250