Welcome, Guest. Please login or register.
Did you miss your activation email?

Username: Password:

Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.

Messages - Chevydmax6

Pages: [1]
Plumbing / Re: Pumps
« on: September 03, 2019, 10:53:39 AM »
I am running liquidus  pumps this is the first year for me so we will see how they work
A lot of people  day it is a knock off of grundfos

HeatMaster / Re: G200
« on: August 17, 2019, 06:50:02 AM »
It does not bend easy but i never used anything else so i cant compare  it

HeatMaster / Re: G200
« on: August 16, 2019, 04:42:33 PM »
Here are some pics of the install i am doing

HeatMaster / Re: G200
« on: August 16, 2019, 04:30:56 PM »
Ok i have been working on the insatll i got the rhinoflex  installed  the back of the stove is hooked up and i have pex ran  in the basement  to the hot water tank i will be running 1" copper from there to tie the furnace and dhw  in to finish the basement  install sunday
The stove is about 10' above the furance plus i am puting in a boiler drain valve in the basement  so i can take my water sample  from there plus i will start to fill the stove there and push the air out to the stove

HeatMaster / Re: G200
« on: August 14, 2019, 07:59:26 PM »
Ok i have desided to do dhw first 
On the furance my dealer said to use the bottom for the in
But i have talked to people  and they recommend  to use the top of it for in cause u want the air to leave the hottest  part last which make since

 Thanks for all the info and clearing thing up for me

HeatMaster / Re: G200
« on: August 13, 2019, 07:00:26 AM »
Well the g200 got delivered  and i got most of the underground pipe installed i am going to be starting the inside plumbing in the next day or so my dealer says he runs to the furnace  first then to dhw and i have talkes to others that say run to dhw first 
I understand  the reason behide both sides just looking for a little more info to help me desie which way to go

HeatMaster / Re: G200
« on: July 24, 2019, 04:21:54 PM »
This is all starting to make sense
So when the boiler stat calls for her and there is no heat there to blow will the blower keep running till the back up stat calls for heat

I want to set me boiler  at 74
And my back up heat to 60
My house holds heat pretty good  so it could take  hours before the backup is needed

HeatMaster / Re: G200
« on: July 23, 2019, 02:18:29 PM »
You can also use an aquastat. If boiler temp drops then the furnace runs as normal instead of having to wait for the house temp to drop

This is what i was going to do but i dont want the propane furance to run all the time if the fire goes out

Here are the pics that E YODER as for

HeatMaster / Re: G200
« on: July 23, 2019, 07:18:46 AM »
I will get some pics tonight when i get home
As for the fan only option  i dont use that

If the boiler water is not up to heat and the stat calls for heat will the fan just run untill the backup heat stat calls for heat to fire the backup source 
 I have neen heating with wood for about 7yrs with a indoor unit and i will set my propane  furnace  at 60 just incase  but it never runs so i feel i may not even need the propane furnace  but it will be nice to have as back up

HeatMaster / Re: G200
« on: July 22, 2019, 05:31:03 PM »
Hello when wiring the furance i am wanting to use 2 thermostats one for boiler and one for the back up heat  does anybody have a wire diagram  for this

HeatMaster / Re: G200
« on: July 15, 2019, 06:51:36 PM »
He is a couple hrs away from me
I have a dealer about 30mins from me that has been great in answering any questions  and will pick ul the phone anytime i call or text

HeatMaster / G200
« on: July 14, 2019, 07:43:45 PM »
Hello i am looking at purchasing  a g200 does anybody no if there are any rebates or epa grants for ohio  before i pull the trigger in the next couple  of days

General Outdoor Furnace Discussion / Re: Outdoor wood boilers
« on: June 28, 2019, 02:27:47 PM »
I agree  that the dealers make a difference
I called my CB dealer and he was not vary talkative  on the phone and is telling me that u can never have to be of a stove he was trying to sell me a edge 750
I have talked to my heatmaster  dealer and he likes to talk and has a ton of info to share
I am going to the heatmaster  dealer  on monday to look at the g200 in person 
I have wathed a look of videos  of both  brands i like the wifi option  on the CB   but that is a small thing

General Outdoor Furnace Discussion / Re: Where the heck do ya live
« on: June 26, 2019, 05:03:16 PM »
I updated mine

General Outdoor Furnace Discussion / Outdoor wood boilers
« on: June 25, 2019, 07:16:27 AM »
Hello i am in the process  of buying a owb 
I am heating right around 4000sqft
I have been looking at the heatmaster g200
I have a central boiler  dealer that is about the same distance  as the heat master dealer
What is your guys thought between  the 2 companies 
This is a big investment  i dont want to find out after i buy that the other  brand is a better choice

Pages: [1]