Welcome, Guest. Please login or register.
Did you miss your activation email?

Username: Password:

Author Topic: Warped Grates  (Read 4061 times)

lindnova

  • Jr. Member
  • **
  • Offline Offline
  • Posts: 96
  • OWF Brand: Heatmor
  • OWF Model: 200 CSS
    • View Profile
Warped Grates
« on: May 21, 2014, 11:35:53 AM »
I just cleaned out the Heatmor 200 yesterday and the grates are really getting warped.  They have been slowly getting worse.  Now they are about 1 to 2 inches lower in the middle and cracking. 

At what point should they be replaced?  Anyone else dealing with this?
Logged
Stihl ms260, ms362, msS461
Huskee 22 TN Splitter
Kubota BX2200 w/ Loader

heat550

  • Sr. Member
  • ****
  • Offline Offline
  • Posts: 401
  • OWF Brand: Heatmor
  • OWF Model: 1994 200ss 2015 400dcss
    • View Profile
Re: Warped Grates
« Reply #1 on: November 11, 2014, 05:22:20 PM »
I had this issue years ago. First what I was doing wrong was not keeping ash box cleaned out.
And ground pipes got water next to them. Not that this is your issue. This was my findings it was a
Spendy lesson. I have a 1996 model. ::)

Heat550
Logged