Print

[doow14]

I made a new seal for mine this year this time I used rope and the high temp stuff with the wax paper until its cured.Never used the rope before so far its the best seal ive ever had.

[Bondo]

Ayuh,....    I just did my door gasket last week,....

I stripped off the old one, cleaned the surfaces with a wire brush on my angle grinder, slathered a big ole bead of hi-temp silicone 'round it, pushed/ placed the new 3/4" rope into place, ran a strip of maskin' tape 'round it to hold it there, 'n closed the door,...

Next day, I opened the door, 'n everything stayed in place, so I loaded 'er up for another day, 'n closed the door again,...
'bout 3 or 4 days later, I got sick of the green tape, so I gently pulled it off, 'n tossed it into the fire,....

I oughta be Good, for another year or three now,....

I get the Rutland 3/4" door rope at the local hardware store, 'n hi-temp silicone at my local auto parts house,....

[kommandokenny]

Replaced mine last June.
Dealer rope and high heat flat black paint, gobbed into the groove first.
Put the rope in and shut the door for 4 months.
Let you know mid winter, but holding up so far.

[automan77]

Replaced my rope gasket last week and went over top with hi temp  and so far it's working nice. Nothing sticks to it anymore and it seals perfect.

[tinfoilhat2020]

awesome! glad it is working good!