Welcome, Guest. Please login or register.
Did you miss your activation email?

Username: Password:
Pages: 1 [2]

Author Topic: Getting close to shutting down and cleaning. What do you do?  (Read 9745 times)

victor6deep

  • Sr. Member
  • ****
  • Offline Offline
  • Posts: 393
  • OWF Brand: Burnrite
  • OWF Model: 228
    • View Profile
Re: Getting close to shutting down and cleaning. What do you do?
« Reply #15 on: February 05, 2013, 04:31:34 AM »

I was thinking of burning a csl log and then cleaning the firebox when spring arrives, would the csl log make cleaning easier? Trying to figure a way to spray a fil of oil throughout the firebox as well and also plan on filling the water level all the way.
Logged

d conover

  • Full Member
  • ***
  • Offline Offline
  • Posts: 135
  • OWF Brand: Hardy
  • OWF Model: H4
    • View Profile
Re: Getting close to shutting down and cleaning. What do you do?
« Reply #16 on: February 05, 2013, 05:27:08 AM »

I live in North East PA. I hope to have it shut down sometime in March. I don't want to burn longer than I have to. I think March will be a good time as it starts to get a little warmer out. This firebox really needs some attention. For one the shaker grates need replaced. HD5, does your H4 have shaker grates?

No, I just have regular grates that sit on an I-beam.  That I-beam is really  in the way when I clean out ashes.  My H-2 didn't have that.

I didn't even know you could get shaker grates for a Hardy. How do they work?  Do they have a crank or handle??
Logged
Southeast Missouri
Hardy H4
044 Stihl
038 Stihl
5100s Dolmar
55R husqvarna
CS301 Echo

DaveWertz

  • Sr. Member
  • ****
  • Offline Offline
  • Posts: 340
  • OWF Brand: Hardy
  • OWF Model: H4
    • View Profile
Re: Getting close to shutting down and cleaning. What do you do?
« Reply #17 on: February 05, 2013, 07:10:40 PM »

I really like the shaker grates. Makes cleaning ash 10x's easier. There is a little tab right inside the bottom door (ash bin). This steel rod came with the stove. It has a hook on one arm and a notch for the shaker grates and you just hook that rod to the tab that runs the skaker unit and rock back and fourth and ash falls to the bottom. I didn't explain that very well LOL. I will try to get a picture and post it. Now I am not sure if the grates just lay in there as by looking at the new ones got me to believe they do but I really won't know until I get to clean it out.
Logged
2001 F150 7700 series
06 Honda Rincon 680. Lifted and made for MUD
09 Harley Superglide custom
Stihl Farmboss 290
Pages: 1 [2]