Welcome, Guest. Please login or register.
Did you miss your activation email?

Username: Password:

Author Topic: Firebricks Replacement  (Read 3721 times)

ramcale

  • Newbie
  • *
  • Offline Offline
  • Posts: 1
  • OWF Brand: Sequoyah
  • OWF Model: E3400
    • View Profile
Firebricks Replacement
« on: October 26, 2013, 09:26:10 AM »
Hi I have a Sequoyah E3400 Gasification Outdoor Wood Furncance. I was wondering if someone could help me on how to replace firebricks. you may either comment on here or email me at aramczyk96@yahoo.com

-Thankyou
Logged

jd

  • Training Wheels
  • *
  • Offline Offline
  • Posts: 10
  • OWF Brand: sequoia
  • OWF Model: 3300
    • View Profile
Re: Firebricks Replacement
« Reply #1 on: October 27, 2013, 06:02:42 AM »
What area of brick are you needing to replace??
most of the firebox is fairly simple, little  more i nvolved in the sides.
I am sure you will hear from someone on this site who exact info

jd
Logged
from Laurel Mt. pa

slimjim

  • Full Member
  • ***
  • Offline Offline
  • Posts: 158
  • OWF Brand: Wood Doctor / HeatMaster
  • OWF Model: 14,000. / G 200 and G 400
  • Southern Maine
    • View Profile
    • www.mainlycustom.com
Re: Firebricks Replacement
« Reply #2 on: October 27, 2013, 06:19:46 AM »
How bad are the bricks, I am very familiar with that boiler, I just replaced all the bricks in the bottom of two of them and made it burn much cleaner, the boiler can be split in half at the base to make access to the brick very easy, when I did it we used two bases from our P+M 250's to open up the chamber in the bottom, what a difference, it also should help to make the brick last much longer as there is very little flame impingment on the brick. I have very limited internet service here on the job but if you PM me with your contact info I will call you in a couple of days with my information
Logged
Wood boiler sales, service and installation for the Northeastern USA.