Print

[AirForcePOL]

I finally got my shop hooked up to my H-2 a few weeks ago!  So far everything is working good. I added a Grundfos 15-58 to supply the water through 1” pex to the air handler that I built. 
I used a blower motor out of my mom’s old furnace and a 18x18 HX from Brazetek.  I haven’t taken the pump off of the 1st speed yet and it has had no issues at all heating my 36x45 shop with 10ft ceilings. 

I used a cheapo Honeywell electric baseboard thermostat and its working great.  It has a swing of about 3 degrees which is perfect for a garage/shop where the temperature doesn’t have to be perfect all the time.   I keep it at 50 unless I’m out there messing around.  I have noticed a big difference in my wood consumption though.   I can't get the photos to upload so here is a link to photobucket.  That's my crazy daughter excited that I finished it. 

http://s40.photobucket.com/user/01amercer1988/library/Mobile%20Uploads

[Sprinter]

Says the album is private unless I did something wrong

[AirForcePOL]

Sorry, try that.