Welcome, Guest. Please login or register.
Did you miss your activation email?

Username: Password:

Author Topic: High wind leave stacks on?? V  (Read 2974 times)

johnybcold

  • Sr. Member
  • ****
  • Offline Offline
  • Posts: 376
  • OWF Brand: Central Boiler
  • OWF Model: Classic E1400
    • View Profile
High wind leave stacks on?? V
« on: October 28, 2012, 06:13:24 AM »
I only have 2 stacks on my e1400 but I was thinking of taking one off during the store, thoughts??
Logged
old truck
old craftsman chain saw
Polaris Sportsman 500HO

boilerman

  • Sr. Member
  • ****
  • Offline Offline
  • Posts: 270
  • OWF Brand: Central Boiler
  • OWF Model: E2400 Currently CL5648 Previously
    • View Profile
Re: High wind leave stacks on?? V
« Reply #1 on: October 28, 2012, 06:23:20 AM »
I think if you have the two chimney sections banded or screwed together at the joint, their is enough bracing there that you should be alright. I you had 3 or 4 sections, that could be of worry IMO.
Logged

MattyNH

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1284
  • OWF Brand: Crown Royal former Aqua-Therm
  • OWF Model: 7300E ; S-275
    • View Profile
Re: High wind leave stacks on?? V
« Reply #2 on: October 28, 2012, 05:25:13 PM »
your fine...leave them up...My stack is twice the height of yours...My stack has been through many high wind storms..
Logged
Crown Royal 7300E (2021)
Aqua-Therm S-275 (2006)
Jonsered 2188
Jonsered 2165
Jonsered 2050
Timberwolf- TWP1 5.5 Honda 25in wood splitter
American CLS- AM48HH 8 Honda 48in wood splitter
Kubota L3800DT
Lake Winnipesaukee New Hampshire

johnybcold

  • Sr. Member
  • ****
  • Offline Offline
  • Posts: 376
  • OWF Brand: Central Boiler
  • OWF Model: Classic E1400
    • View Profile
Re: High wind leave stacks on?? V
« Reply #3 on: October 29, 2012, 06:54:52 AM »
Thx I left them up, so far Ma is not getting much if a storm
Logged
old truck
old craftsman chain saw
Polaris Sportsman 500HO