Print

[Jwood]

Just thought all the parts and stuff they offered would be helpful for some of you out there, they have a downloadable catalog!
 http://www.altheatsupply.com/

[Steinacher Sales]

Jwood,

I use these folks all the time. They are good to deal with and are good people, all of them!

Greg Steinacher
618-401-0726

[Jwood]

Awesome glad to hear that I like the look of the dragons breath units as well!

[Scott7m]

Try z supply

USA made mostly, they buy everything they can in priority, us, north America, democracies, then China

The quality is there

[Jwood]

I'll give that a look thanks Scott

[Sprinter]

Anyone notice the taco circs and their "bronze cartridge" option. They are cast iron bodies with a bronze cartridge. I didn't know there was any difference, cause all the cartridges I have here are stainless jacket and stainless shaft. And last I checked a lot of the bronze circs were discontinued and stainless units were offered instead. Since the cost of materials and low lead BS went into effect. It seams misleading ,,,,, along with some of their blogs.

[Scott7m]

3 of the last 5 Taco 2400-20 OWB pumps were dead on arrival

They are a dry rotor design and air cooled, but for whatever reason the paint on them has been driven into the motor and locked them up.  The pump didn't have the power to break the paint loose that was locking the shaft.  Another disappointment

[Jwood]

 Are those all coming from that website or taco pumps in general?

[Scott7m]

Are those all coming from that website or taco pumps in general?

im not sure where they came from, I split a order with another dealer to get a case of 10 and they were like that. 

[Jwood]

That sucks! What kind of pumps are your favorite Scott? Taco brand or.......

[Scott7m]

That sucks! What kind of pumps are your favorite Scott? Taco brand or.......

I would have to say I really like Grundfos

[Sprinter]

3 of the last 5 Taco 2400-20 OWB pumps were dead on arrival

They are a dry rotor design and air cooled, but for whatever reason the paint on them has been driven into the motor and locked them up.  The pump didn't have the power to break the paint loose that was locking the shaft.  Another disappointment

funny you say that cuz when I was at KLMcCoy last there were two 2400's on the bench. I didnt know they did repair there. I also dont know if they were bad either but they were on the service guys bench.

you cant go wrong with Taco or grundfos and properly sized of course

[Scott7m]

3 of the last 5 Taco 2400-20 OWB pumps were dead on arrival

They are a dry rotor design and air cooled, but for whatever reason the paint on them has been driven into the motor and locked them up.  The pump didn't have the power to break the paint loose that was locking the shaft.  Another disappointment

funny you say that cuz when I was at KLMcCoy last there were two 2400's on the bench. I didnt know they did repair there. I also dont know if they were bad either but they were on the service guys bench.

you cant go wrong with Taco or grundfos and properly sized of course

I just feel quality control is getting away at taco, how else could they allow pumps to be shipped locked with paint.  Its beyond me

But here I am using a taco bumblebee haha

[Jwood]

Good info!

[slimjim]

They all seem to be pushing the Chinese knock offs at the internet websites, this is why I buy my circs at my local supply house, they are genuine and if I have a problem I can easily drop it off next time I'm there for a replacement with no questions asked.