Welcome, Guest. Please login or register.
Did you miss your activation email?

Username: Password:
Pages: 1 [2]

Author Topic: boiler location  (Read 9779 times)

slimjim

  • Full Member
  • ***
  • Offline Offline
  • Posts: 158
  • OWF Brand: Wood Doctor / HeatMaster
  • OWF Model: 14,000. / G 200 and G 400
  • Southern Maine
    • View Profile
    • www.mainlycustom.com
Re: boiler location
« Reply #15 on: October 21, 2013, 04:10:25 AM »
As long as you are satisfied with your GPM, my rule of thumb has always been ( 1GPM = 10,000 BTU ) you should also keep in mind that 1 inch LOGSTOR is 1 inch inside, 1 inch pex made in north America is nominally sized, about .82 inches inside.
Logged
Wood boiler sales, service and installation for the Northeastern USA.

yoderheating

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 833
    • View Profile
Re: boiler location
« Reply #16 on: October 21, 2013, 06:00:04 AM »
Quote from: Scott7m on October 11, 2013, 08:08:10 PM
Quote from: Crow on October 11, 2013, 07:59:02 PM
I'm also trying to decide on my location but curious how many installed there furnace with the door facing into the prevailing wind so the smoke blows into the furnace? Is it important or am I overthinking this?

Over thinking a bit

But it don't hurt to try

If I did that the wind would blow the wrong way all winter lol
I try and do this on every job. Most home owners know the wind currents around their home and can tell you the prevailing wind. When all else fails face the furnace west. If its convenient facing it into the wind does held with smoke when loading.
Logged
Southwest Virginia
WF4000 Heat Master
Pages: 1 [2]
« previous next »