Welcome, Guest. Please login or register.
Did you miss your activation email?

Username: Password:

Author Topic: Got it figured out...thanks for your help  (Read 3402 times)

jack1243

  • Training Wheels
  • *
  • Offline Offline
  • Posts: 25
  • OWF Brand: 500 gallon Hick Water Stove
  • OWF Model: 50003212008
    • View Profile
Got it figured out...thanks for your help
« on: December 27, 2012, 12:38:32 PM »
Just wanted to let eveyone on here know that your thoughts and ideas were most helpful. We did have a sever draft issue with the stove. My chimney guy came out today and opened up from a 6" flue to an 8" flue cleaned the chimney and all that. Got the cresote factory gone and also found my blower had a homemade draft control on the back...and old coffee can lid with a bold attatched that was closed. I had no idea it was there as it is between the wall of the stove on the back of the blower. Opened it up and it was like a blast furnace. Wish I'd known the blasted thing was there from day one would have saved me a chimney cleaning but the 8" flue tile was needed. I'll keep you all posted as to how the heating is going got to give the flue cement a 24 hour dry time should be back up and running tomrrow afternoon. Thanks for all your ideas and suggestions.
Logged

Roger2561

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1780
  • OWF Brand: Central Boiler
  • OWF Model: Classic Edge 550 HD
    • View Profile
Re: Got it figured out...thanks for your help
« Reply #1 on: December 27, 2012, 01:18:05 PM »
I hope your struggles are over and it'll be able to provide the heat to keep you warm.  Thanks for the update.  Roger
Logged
CB Classic Edge 550 HD
JD Tractor 4500 4X4 with front-end loader
JD LX277AWS
Stihl 021
Stihl MS 311
Cud Cadet 27 Ton Wood splitter
2012 Honda Goldwing GL1800
New Hampshire

baldwin racing

  • Full Member
  • ***
  • Offline Offline
  • Posts: 210
  • OWF Brand: Thermo-Control (indoor)
  • OWF Model: 500/2000 (in the insulated jacket)
    • View Profile
Re: Got it figured out...thanks for your help
« Reply #2 on: December 27, 2012, 02:50:43 PM »
Quote from: jack1243 on December 27, 2012, 12:38:32 PM
Just wanted to let eveyone on here know that your thoughts and ideas were most helpful. We did have a sever draft issue with the stove. My chimney guy came out today and opened up from a 6" flue to an 8" flue cleaned the chimney and all that. Got the cresote factory gone and also found my blower had a homemade draft control on the back...and old coffee can lid with a bold attatched that was closed. I had no idea it was there as it is between the wall of the stove on the back of the blower. Opened it up and it was like a blast furnace. Wish I'd known the blasted thing was there from day one would have saved me a chimney cleaning but the 8" flue tile was needed. I'll keep you all posted as to how the heating is going got to give the flue cement a 24 hour dry time should be back up and running tomrrow afternoon. Thanks for all your ideas and suggestions.

cool to here jack  :thumbup: hope all the worries are over......let us know how it runs when you fire it up buddy......
kelly
Logged
husqvarna 357 xp
allis-chalmers 5050 2,100 org hrs
farmall m (set up for just tractor pulling)
farmall H

fryedaddy

  • Full Member
  • ***
  • Offline Offline
  • Posts: 235
  • OWF Brand: Hicks Water Stove
  • OWF Model: 750 Gallon
    • View Profile
Re: Got it figured out...thanks for your help
« Reply #3 on: December 28, 2012, 06:53:23 AM »
I'm glad to here that, hope the rest of your burning season goes well.
Logged