Welcome, Guest. Please login or register.
Did you miss your activation email?

Username: Password:
Pages: 1 [2]

Author Topic: Coatings  (Read 12409 times)

Scott7m

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3740
  • OWF Brand: Heatmaster
  • OWF Model: E Series
    • View Profile
Re: Coatings
« Reply #15 on: March 17, 2013, 02:38:30 PM »
Yes I do...   You can pm me your address and such and I can give you the total.
Logged
Dealer for:  Heatmaster, Empyre, Earth, Ridgewood, and Woodmaster outdoor furnaces
Furnace Parts Dealer
Pelican water treatment systems
606-316-9697

Roger2561

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1780
  • OWF Brand: Central Boiler
  • OWF Model: Classic Edge 550 HD
    • View Profile
Re: Coatings
« Reply #16 on: March 17, 2013, 04:41:06 PM »
Scott, will this stuff work okay on a gasser too?  I may wait to purchase some until next heating season.  It won't be long before I'll be shutting her down for the summer and I'll be giving her a thorough cleaning at that time. 

I don't know if you know how CB made the e1400 but along the side walls and the rear wall there are about 18 air holes for the primary draft.  These holes are most problematic to keep clear of creosote buildup and keep from plugging.  They are a royal pain the in the a__ to clean.  I am hopeful that the proformer will aid in keeping the creosote from building up as much as it does.  I burn all hard wood that has been seasoned for 3 years under cover and creosote buildup is still a problem in the e1400.  I suspect that it is a problem for all gassers.  Roger
Logged
CB Classic Edge 550 HD
JD Tractor 4500 4X4 with front-end loader
JD LX277AWS
Stihl 021
Stihl MS 311
Cud Cadet 27 Ton Wood splitter
2012 Honda Goldwing GL1800
New Hampshire

Scott7m

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3740
  • OWF Brand: Heatmaster
  • OWF Model: E Series
    • View Profile
Re: Coatings
« Reply #17 on: March 17, 2013, 07:11:53 PM »
Quote from: Roger2561 on March 17, 2013, 04:41:06 PM
Scott, will this stuff work okay on a gasser too?  I may wait to purchase some until next heating season.  It won't be long before I'll be shutting her down for the summer and I'll be giving her a thorough cleaning at that time. 

I don't know if you know how CB made the e1400 but along the side walls and the rear wall there are about 18 air holes for the primary draft.  These holes are most problematic to keep clear of creosote buildup and keep from plugging.  They are a royal pain the in the a__ to clean.  I am hopeful that the proformer will aid in keeping the creosote from building up as much as it does.  I burn all hard wood that has been seasoned for 3 years under cover and creosote buildup is still a problem in the e1400.  I suspect that it is a problem for all gassers.  Roger

That's what it's made for.  It can help conventionals to but primary purpose was to help with cleaning on gasification boilers.  That's what Marty is using it on
Logged
Dealer for:  Heatmaster, Empyre, Earth, Ridgewood, and Woodmaster outdoor furnaces
Furnace Parts Dealer
Pelican water treatment systems
606-316-9697

Roger2561

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1780
  • OWF Brand: Central Boiler
  • OWF Model: Classic Edge 550 HD
    • View Profile
Re: Coatings
« Reply #18 on: March 18, 2013, 03:46:45 AM »
When I'm ready to purchase, I'll PM you my mailing address and at the same time you can let me know the total cost, including shipping.   Thanks, Roger
Logged
CB Classic Edge 550 HD
JD Tractor 4500 4X4 with front-end loader
JD LX277AWS
Stihl 021
Stihl MS 311
Cud Cadet 27 Ton Wood splitter
2012 Honda Goldwing GL1800
New Hampshire

mw10737

  • Jr. Member
  • **
  • Offline Offline
  • Posts: 72
  • OWF Brand: Empyre
  • OWF Model: 250 Deluxe
    • View Profile
Re: Coatings
« Reply #19 on: March 21, 2013, 11:14:46 PM »
SCOTT.  Let me know how much i would need for my 250.  I wanna try this stuff. Send me a text tommorow with the total.  Would love to try it out..


Has the float showed up from Empyre yet?
Logged
Empyre Deluxe 250( NON-GASSER)
MS660 Magnum-36"
MS271-20"
018C-14"
2007 GMC Crew Cab Duramax
Plainfield, Iowa
Pages: 1 [2]
« previous next »