Welcome, Guest. Please login or register.
Did you miss your activation email?

Username: Password:

Author Topic: how long to get the water to temp.  (Read 6481 times)

brennan81

  • Training Wheels
  • *
  • Offline Offline
  • Posts: 7
    • View Profile
how long to get the water to temp.
« on: November 02, 2014, 10:58:49 AM »
Was wondering how long it takes your water to get up to temp when you first start your boiler for the season? Thanks for the responses in advance.
Logged

newmod

  • Jr. Member
  • **
  • Offline Offline
  • Posts: 61
  • OWF Brand: HOMEMADE
    • View Profile
Re: how long to get the water to temp.
« Reply #1 on: November 02, 2014, 11:52:22 AM »
The last woodburner i built took probably around 2 hours that i remember.  It felt like forever.   I thought i was having a draft problem because i thought it was taking too long.  But once up to temp there has not been 1 problem at all.  I am finishing up my second build now, and someone contacted me about building them one.  UGH.
Newmod
Logged

mlappin

  • Fabricator Extraordinaire
  • Global Moderator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 4140
  • OWF Brand: homebuilt, now HeatmasterSS
  • OWF Model: Martin Steel Works Gen 1 then, now a G200.
  • North Liberty, Indiana
    • View Profile
    • Altheatsolutions
Re: how long to get the water to temp.
« Reply #2 on: November 02, 2014, 12:57:49 PM »
Also depends on how efficient it is, what kind of wood, and how many gallons of water it holds.
Logged
Stihl 023
Stihl 362
Stihl 460
Sachs Dolmar 112 and 120
Homemade skid steer mounted splitter, 30" throat, 5" cylinder
Wood-Eze model 8100 firewood processor

HeatmasterSS dealer for Northern Indiana

LittleJohn

  • Sr. Member
  • ****
  • Offline Offline
  • Posts: 494
  • OWF Brand: Central Boiler
  • OWF Model: E-Classic 2400
  • Lonsdale, MN
    • View Profile
Re: how long to get the water to temp.
« Reply #3 on: November 03, 2014, 08:10:28 AM »
CB eClassic 2400, with no load and about 350 gallon water jacket; took about 4-5 hours with a small fire (took my time burning up junk wood and scraps, while cleaning up the yard)

It will take a solid day to get detached garage (4k sf in-slab) and house (2500 sf in-slab and 1500 under subfloor), up to temperature.  This is assuming its not too cold out side, one year it took about 3 days to get detached garage up to temperature, because of waiting to long to set heat going then a few trouble shooting issues.
Logged

vpd66

  • Training Wheels
  • *
  • Offline Offline
  • Posts: 48
    • View Profile
Re: how long to get the water to temp.
« Reply #4 on: November 03, 2014, 10:40:56 AM »
All depends on water capacity, wood quality, and outside temperature. I've had my AquaTherm up to temp in has little has 45 minutes, but most of the time it takes about 1..5-2 hours.
Logged