Welcome, Guest. Please login or register.
Did you miss your activation email?

Username: Password:
Pages: 1 2 3 [4] 5 6 ... 9

Author Topic: ProFab has some issues!  (Read 18081 times)

Spyder5276

  • Training Wheels
  • *
  • Offline Offline
  • Posts: 41
  • OWF Brand: Pro fab
  • OWF Model: Pro 400
    • View Profile
Re: ProFab has some issues!
« Reply #45 on: April 11, 2014, 09:55:07 PM »

Also for the one who asked. The boiler water runs from the boiler into my house it is T'd and splits. One to a plate heat exchanger. Others goes over to the heat exchanger in the forced air. So boiler water is in boiler and heat exchsnger. House hot water runs throughout plate exchanger to tank back to plate
Logged

mlappin

  • Fabricator Extraordinaire
  • Global Moderator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 4103
  • OWF Brand: homebuilt, now HeatmasterSS
  • OWF Model: Martin Steel Works Gen 1 then, now a G200.
  • North Liberty, Indiana
    • View Profile
    • Altheatsolutions
Re: ProFab has some issues!
« Reply #46 on: April 11, 2014, 09:57:22 PM »

Have to disagree on that.

It was mentioned several times that you were sold a stove that was too large for your heat requirement. It was mentioned several times not to over fill it. It was also mentioned several times that with that large a stove your idle times are too long.

After the help that was offered you instead accuse people of being on the take.

Logged
Stihl 023
Stihl 362
Stihl 460
Sachs Dolmar 112 and 120
Homemade skid steer mounted splitter, 30" throat, 5" cylinder
Wood-Eze model 8100 firewood processor

HeatmasterSS dealer for Northern Indiana

Scott7m

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3740
  • OWF Brand: Heatmaster
  • OWF Model: E Series
    • View Profile
Re: ProFab has some issues!
« Reply #47 on: April 11, 2014, 09:59:10 PM »


We def were not being crickets, but in regards of helping you in particular, we will def be crickets now... 


I wish we could sticky this post for an example of how not to approach a problem or a forum of people who is here because we are passionate about burning wood


 I supposed u would have rather us lied to you vs telling you why you had this issue to start with
Logged
Dealer for:  Heatmaster, Empyre, Earth, Ridgewood, and Woodmaster outdoor furnaces
Furnace Parts Dealer
Pelican water treatment systems
606-316-9697

Spyder5276

  • Training Wheels
  • *
  • Offline Offline
  • Posts: 41
  • OWF Brand: Pro fab
  • OWF Model: Pro 400
    • View Profile
Re: ProFab has some issues!
« Reply #48 on: April 11, 2014, 10:01:12 PM »

And was told by the central boiler dealer this unit was to small for me!
Logged

Scott7m

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3740
  • OWF Brand: Heatmaster
  • OWF Model: E Series
    • View Profile
Re: ProFab has some issues!
« Reply #49 on: April 11, 2014, 10:02:01 PM »

Also for the one who asked. The boiler water runs from the boiler into my house it is T'd and splits. One to a plate heat exchanger. Others goes over to the heat exchanger in the forced air. So boiler water is in boiler and heat exchsnger. House hot water runs throughout plate exchanger to tank back to plate

Wow what a freakin mess........  Thats all about as wrong and sloppy as it gets, thats even a 10 plate!!  Sheww.. 

Logged
Dealer for:  Heatmaster, Empyre, Earth, Ridgewood, and Woodmaster outdoor furnaces
Furnace Parts Dealer
Pelican water treatment systems
606-316-9697

Spyder5276

  • Training Wheels
  • *
  • Offline Offline
  • Posts: 41
  • OWF Brand: Pro fab
  • OWF Model: Pro 400
    • View Profile
Re: ProFab has some issues!
« Reply #50 on: April 11, 2014, 10:04:39 PM »

O I am sorry the help was AFTER the unit killed over! And I once again thank you for your input of the reasons it went wrong. Just makes my point even stronger.
Logged

Spyder5276

  • Training Wheels
  • *
  • Offline Offline
  • Posts: 41
  • OWF Brand: Pro fab
  • OWF Model: Pro 400
    • View Profile
Re: ProFab has some issues!
« Reply #51 on: April 11, 2014, 10:06:43 PM »

640 and rising  ;D  :thumbup:  :post:
Logged

Scott7m

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3740
  • OWF Brand: Heatmaster
  • OWF Model: E Series
    • View Profile
Re: ProFab has some issues!
« Reply #52 on: April 11, 2014, 10:07:51 PM »

And was told by the central boiler dealer this unit was to small for me!

well 2 wrongs dont make a right....   


Still cant believe how sloppy it was all done... 

This all comes back to the dealer not knowing what hes doing, but as a customer making such a large investment, research was crucial.. 

Now someone can read this mess and benefit from it and the see the impotance of an informed dealer vs one making you a sweet deal, not that he did
Logged
Dealer for:  Heatmaster, Empyre, Earth, Ridgewood, and Woodmaster outdoor furnaces
Furnace Parts Dealer
Pelican water treatment systems
606-316-9697

Scott7m

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3740
  • OWF Brand: Heatmaster
  • OWF Model: E Series
    • View Profile
Re: ProFab has some issues!
« Reply #53 on: April 11, 2014, 10:13:51 PM »

640 and rising  ;D  :thumbup:  :post:

U dont know how the count works do you???   

Of the 640 hits half are likely bots, 90% of the other half is likely a handful of us regulars.

like I said before, this isnt goin to help u at all


Serious question, how were we supposed to help you with a problem before we here ever knew there was a problem?   You came on here condescending immediately, with each post u simply argued.   before any problem can be fixed, we need to know why it happened to begin with
Logged
Dealer for:  Heatmaster, Empyre, Earth, Ridgewood, and Woodmaster outdoor furnaces
Furnace Parts Dealer
Pelican water treatment systems
606-316-9697

mlappin

  • Fabricator Extraordinaire
  • Global Moderator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 4103
  • OWF Brand: homebuilt, now HeatmasterSS
  • OWF Model: Martin Steel Works Gen 1 then, now a G200.
  • North Liberty, Indiana
    • View Profile
    • Altheatsolutions
Re: ProFab has some issues!
« Reply #54 on: April 11, 2014, 10:15:47 PM »

O I am sorry the help was AFTER the unit killed over! And I once again thank you for your input of the reasons it went wrong. Just makes my point even stronger.

NOW you're being an ass.

You didn't post on this site till after you had the problem, don't blame the good people here for not being able to head off a problem after the damage has already been done. Take that up with the dealer that you dealt with originally.
Logged
Stihl 023
Stihl 362
Stihl 460
Sachs Dolmar 112 and 120
Homemade skid steer mounted splitter, 30" throat, 5" cylinder
Wood-Eze model 8100 firewood processor

HeatmasterSS dealer for Northern Indiana

Scott7m

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3740
  • OWF Brand: Heatmaster
  • OWF Model: E Series
    • View Profile
Re: ProFab has some issues!
« Reply #55 on: April 11, 2014, 10:19:22 PM »

O I am sorry the help was AFTER the unit killed over! And I once again thank you for your input of the reasons it went wrong. Just makes my point even stronger.

NOW you're being an ass.

You didn't post on this site till after you had the problem, don't blame the good people here for not being able to head off a problem after the damage has already been done. Take that up with the dealer that you dealt with originally.


Somehow he thinks this is making someone besides him look bad???????    :o

650 and rising lol
Logged
Dealer for:  Heatmaster, Empyre, Earth, Ridgewood, and Woodmaster outdoor furnaces
Furnace Parts Dealer
Pelican water treatment systems
606-316-9697

AirForcePOL

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 864
  • OWF Brand: HeatMaster
  • OWF Model: G400
    • View Profile
Re: ProFab has some issues!
« Reply #56 on: April 11, 2014, 10:22:15 PM »

Good luck getting help from anyone on here with that attitude.  You came here for help and then piss off everyone who was offering their time to give you their advice.  I'm pretty sure you've already worn out your welcome here, spyder.
Logged
Athens, Illinois
Dealer for HeatMaster SS
Stihl MS 290
Troy Bilt 27 ton splitter

Spyder5276

  • Training Wheels
  • *
  • Offline Offline
  • Posts: 41
  • OWF Brand: Pro fab
  • OWF Model: Pro 400
    • View Profile
Re: ProFab has some issues!
« Reply #57 on: April 11, 2014, 10:32:15 PM »

I know how views work! 2 your all still posting. 3. I came here looking for advise to help me find what went posting. 4 start from the beginning.
I love the jumper on's. 
have I rattled your chains? 
I came on here to get advise on the reasons and what or who I could contact to get heat in my house without spending $700 in electric bills. So for those who can't read or want to read between the lines have fun with the bashing. I am!
Friday night fun!! Whoop whoop.
Logged

Jwood

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1065
  • OWF Brand: P&M Ultimizer
  • OWF Model: Bl 28-40
    • View Profile
Re: ProFab has some issues!
« Reply #58 on: April 11, 2014, 10:35:20 PM »

Too bad you couldn't have found this site before your purchase everyone would have helped you on your purchase, I have learned tons on this site because that's what it is for if you want to start a war against pro fab so be it, just don't do it here because this group has passion about wood burning and not that it matters but I've installed many furnaces and even the new stuff has issues. It's just the way it is, that's why they sell parts for new furnaces. I could put a 100,000 btu furnace in my house sure but is it going to work yes it will, will I get the 97% efficiency that its rated? Nope! Why you ask, because my house needs a 75,000 btu furnace. I didn't go on a slam fest about my Heil furnace when the smart gas valve went out because it would have got me nowhere I bought the part and went about my business, don't sweat the small stuff so to speak, don't let yourself get so wound up, your boiler is man made same as my furnace and people make mistakes. Prime example would be vehicle recalls, they don't build cars knowing there is a problem so they can get a bunch of negative press it just happens unfortunately!
Logged
North Central Minnesota
Stihl MS 270c
Stihl MS 461
Blacked out Fiskars X27
06' Silverado 2500HD Duramax

Spyder5276

  • Training Wheels
  • *
  • Offline Offline
  • Posts: 41
  • OWF Brand: Pro fab
  • OWF Model: Pro 400
    • View Profile
Re: ProFab has some issues!
« Reply #59 on: April 11, 2014, 11:07:19 PM »

Thank you. You just proved my passion on why has it not been taken care of. Yes the dealer has dropped the ball. But also has profab. If you was the company would you not want to get this resolved ASAP? I would! I work in a industry that its main focus is" hospitality" we make customers first. Even If there wrong. Just to promote more business.
Yes did I not find your site. Do I bust my ass to provide for my family? YOU BEST PUT YOUR LIFE ON THAT!
Am I a OWB pro? He'll no. Did I get shafted? He'll yes!
But who started calling "dick?" Yep Scott!
Am I wrong hell yes. BUT AT LEAST I WILL SAY IT!
I
No ones perfict but at least make the attemp to do wright!
Logged
Pages: 1 2 3 [4] 5 6 ... 9