Welcome, Guest. Please login or register.
Did you miss your activation email?

Username: Password:

Author Topic: Is a thin even coating of creosote ok or bad?  (Read 5811 times)

oaky

  • Full Member
  • ***
  • Offline Offline
  • Posts: 219
  • OWF Brand: Portage & Main
  • OWF Model: BL-2840
    • View Profile
Is a thin even coating of creosote ok or bad?
« on: October 20, 2014, 08:28:42 AM »

Just wondering if a thin even coating of creosote, about a fingernail thickness, bad for mild steel water jackets of owb's when outdoor day temps are in 50's & 60's F for 3 or 4 weeks stretch at a time? I load up 3 or 4 pieces of dry oak in the morning & same amount in the evening.
Logged
Husqvarna 272
Husqvarna 55
27 Ton Cub Cadet Log Splitter
John Deere 826D Walk-Behind Snowblower
Always A Good Pile Of Oak Firewood
Home is: West Central Wisconsin

slimjim

  • Full Member
  • ***
  • Offline Offline
  • Posts: 158
  • OWF Brand: Wood Doctor / HeatMaster
  • OWF Model: 14,000. / G 200 and G 400
  • Southern Maine
    • View Profile
    • www.mainlycustom.com
Re: Is a thin even coating of creosote ok or bad?
« Reply #1 on: October 20, 2014, 09:36:44 AM »

It's fine Oaky, nothing to worry about!
Logged
Wood boiler sales, service and installation for the Northeastern USA.

ijon

  • Sr. Member
  • ****
  • Offline Offline
  • Posts: 263
  • OWF Brand: Portage and main
  • OWF Model: 28-40
    • View Profile
Re: Is a thin even coating of creosote ok or bad?
« Reply #2 on: October 20, 2014, 11:18:37 AM »

Thanks Slim, I was wondering the same thing. By the way I had my first flash back when I opened the door yesterday. I know why they put a safety latch on the door.
Logged
installed in 2014

oaky

  • Full Member
  • ***
  • Offline Offline
  • Posts: 219
  • OWF Brand: Portage & Main
  • OWF Model: BL-2840
    • View Profile
Re: Is a thin even coating of creosote ok or bad?
« Reply #3 on: October 20, 2014, 12:00:12 PM »

By the way I had my first flash back when I opened the door yesterday. I know why they put a safety latch on the door.

After a couple more of them, you will never forget to open the door slowly again. :P
Logged
Husqvarna 272
Husqvarna 55
27 Ton Cub Cadet Log Splitter
John Deere 826D Walk-Behind Snowblower
Always A Good Pile Of Oak Firewood
Home is: West Central Wisconsin

oaky

  • Full Member
  • ***
  • Offline Offline
  • Posts: 219
  • OWF Brand: Portage & Main
  • OWF Model: BL-2840
    • View Profile
Re: Is a thin even coating of creosote ok or bad?
« Reply #4 on: October 20, 2014, 05:42:02 PM »

One more creosote question, does this paper thin creosote really need to be scraped off when we shut the owb down for the summer, as long there aren't thick globs of it in the corners & crevices? Thanks.
Logged
Husqvarna 272
Husqvarna 55
27 Ton Cub Cadet Log Splitter
John Deere 826D Walk-Behind Snowblower
Always A Good Pile Of Oak Firewood
Home is: West Central Wisconsin

slimjim

  • Full Member
  • ***
  • Offline Offline
  • Posts: 158
  • OWF Brand: Wood Doctor / HeatMaster
  • OWF Model: 14,000. / G 200 and G 400
  • Southern Maine
    • View Profile
    • www.mainlycustom.com
Re: Is a thin even coating of creosote ok or bad?
« Reply #5 on: October 20, 2014, 05:57:35 PM »

It's the thick stuff in the corners on a regular boiler I would be concerned about, I don't think you will find it in the B-L, let us know in the spring!
Logged
Wood boiler sales, service and installation for the Northeastern USA.

oaky

  • Full Member
  • ***
  • Offline Offline
  • Posts: 219
  • OWF Brand: Portage & Main
  • OWF Model: BL-2840
    • View Profile
Re: Is a thin even coating of creosote ok or bad?
« Reply #6 on: October 20, 2014, 06:17:58 PM »

I will, thanks.
Logged
Husqvarna 272
Husqvarna 55
27 Ton Cub Cadet Log Splitter
John Deere 826D Walk-Behind Snowblower
Always A Good Pile Of Oak Firewood
Home is: West Central Wisconsin

farmboythegreat

  • Full Member
  • ***
  • Offline Offline
  • Posts: 165
  • OWF Brand: freisen
  • OWF Model: 33hd
    • View Profile
Re: Is a thin even coating of creosote ok or bad?
« Reply #7 on: October 21, 2014, 04:07:48 AM »

Thanks Slim, I was wondering the same thing. By the way I had my first flash back when I opened the door yesterday. I know why they put a safety latch on the door.


 :thumbup: just another bonus of  burning  wood  ,  no need for the barber to  trim them pesky eye brows  :thumbup:
Logged
Muir Ontario Canada

automan77

  • Sr. Member
  • ****
  • Offline Offline
  • Posts: 307
  • OWF Brand: ridgewood
  • OWF Model: 6000
  • Just say no to propane
    • View Profile
Re: Is a thin even coating of creosote ok or bad?
« Reply #8 on: October 21, 2014, 07:23:24 AM »

Trimmed mine a few times last winter. Came in and my wife says what the heck did you do.
Logged
Scott K
Stihl ms 311
Husky 455

St Clair County Michigan



Troy Built 27 ton splitter

fryedaddy

  • Full Member
  • ***
  • Offline Offline
  • Posts: 235
  • OWF Brand: Hicks Water Stove
  • OWF Model: 750 Gallon
    • View Profile
Re: Is a thin even coating of creosote ok or bad?
« Reply #9 on: October 21, 2014, 07:31:57 AM »

Slim,

Can water make it to the firebox when these stoves are shutdown and its raining?
Logged

slimjim

  • Full Member
  • ***
  • Offline Offline
  • Posts: 158
  • OWF Brand: Wood Doctor / HeatMaster
  • OWF Model: 14,000. / G 200 and G 400
  • Southern Maine
    • View Profile
    • www.mainlycustom.com
Re: Is a thin even coating of creosote ok or bad?
« Reply #10 on: October 21, 2014, 07:42:05 AM »

No, it would have to turn horizontally into the stainless tee then through the 3'rd pass, 180 degrees turn back to the rear and then drop vertically down past the heat trap, I don't see it happening, it would have to be an awful lot of rain!!!!!
Logged
Wood boiler sales, service and installation for the Northeastern USA.

fryedaddy

  • Full Member
  • ***
  • Offline Offline
  • Posts: 235
  • OWF Brand: Hicks Water Stove
  • OWF Model: 750 Gallon
    • View Profile
Re: Is a thin even coating of creosote ok or bad?
« Reply #11 on: October 21, 2014, 11:45:12 AM »

Awesome, that is half the battle with cresote and water rotting OWB's out.

Love that BL design!! Now I need enough money to buy one.
Logged

slimjim

  • Full Member
  • ***
  • Offline Offline
  • Posts: 158
  • OWF Brand: Wood Doctor / HeatMaster
  • OWF Model: 14,000. / G 200 and G 400
  • Southern Maine
    • View Profile
    • www.mainlycustom.com
Re: Is a thin even coating of creosote ok or bad?
« Reply #12 on: October 21, 2014, 11:55:20 AM »

It's only money! look at it as an investment, like a new chainsaw
Logged
Wood boiler sales, service and installation for the Northeastern USA.

fryedaddy

  • Full Member
  • ***
  • Offline Offline
  • Posts: 235
  • OWF Brand: Hicks Water Stove
  • OWF Model: 750 Gallon
    • View Profile
Re: Is a thin even coating of creosote ok or bad?
« Reply #13 on: October 22, 2014, 11:10:46 AM »

I know but it would be hard to talk the misses into another when last year was close to the first season with mine.

I love my new stove but the grass is always greener!!
Logged